Cadillac Logo Front Grille LED Luxury Metallic Dynamic Crystal Illuminated Emblem

Upgrade your Cadillac with a premium LED Front Grille Emblem Light. Designed for car modification enthusiasts, it adds a refined, high-tech glow that fits seamlessly with factory styling—subtle by day, striking by night.

Features

• Premium LED emblem light that replaces the original Cadillac logo on the front grille
• Dynamic crystal illumination with a clean, futuristic glow
• Housing: white lights in alloy housing; colored lights in plastic housing
• Easy installation with 3M adhesive and mounting clips; press firmly to secure
• Two-wire power connection: red wire to daytime running lights, black wire to ground
• Model compatibility (no 360° camera unless specified):
• Escalade (2015.5–2024)
• XT6 (2019.7–2025) – without 360° camera
• XT5 (2019.5–2025) – without 360° camera
• XT4 (2020.10–2025) – without 360° camera
• CT5 (2019.9–2025) – without 360° camera
• CT4 (2020.4–2025) – without 360° camera
• CT4 / CT5 (2020–2024) – with 360° camera
• XTS (2018–2020) – without 360° camera
• CTS (2014–2019) – without 360° camera
• Note: CT4-V and CT5-V Blackwing variants are not compatible due to ACC placement behind the emblem

Installation

• General steps: Remove the old logo, apply the new logo light using 3M adhesive and clips, press firmly to seat, align the buckle, and press in place. Then connect the wires as instructed.
• XT5 power connection: Remove the original connector clip. Insert the positive and negative pins through the clip. Negative = Left pin #1; Positive = Left pin #2. Secure with a zip tie.
• CT5 headlight connector power source: The 4th wire from the right (black) is Negative; The 2nd wire from the left (red) is Positive. Insert pins into the corresponding wires and secure with a zip tie.
• XT6 power connection: At the headlight connector position, insert the positive and negative pins from the back side of the corresponding wires. Secure with a zip tie.
• XT4 power connection: Remove the connector clip. Insert the positive pin through the clip into the 3-wire position; insert the negative pin into the 2-wire position. Reinstall the clip and secure with a zip tie.
• CT4 power connection: The third blue wire is Positive; The negative wire can be grounded to the vehicle chassis.
• CT4/CT5 (with 360° camera) users: Follow the corresponding model-specific wiring instructions above and ensure proper routing to avoid interference with camera systems.

Gallery: https://cdn.shopify.com/s/files/1/1099/6796/files/ATS_installation_methods.jpg?v=1763021166

Gallery: https://cdn.shopify.com/s/files/1/1099/6796/files/cadillac_logo_light_diagram_d3b3de8e-5fe2-4caf-a76b-36e973431fb7.jpg?v=1763022015

Gallery: https://cdn.shopify.com/s/files/1/1099/6796/files/cadillac_power_connecttion_diagram.png?v=1763022081

Transform your Cadillac with a discreet, high-tech emblem that looks factory-fresh and stands out after dark. This LED front grille emblem light is crafted for durability and designed to integrate smoothly with your vehicle’s existing styling, delivering a sophisticated upgrade without compromising the original aesthetic.